NSN 5305-01-215-5793
High Torque Screw
Internal drive ribbed.
Manufacturer part number LD111-0044-2412 for national stock number 5305012155793.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-215-5793.
-
MPN or Model
LD111-0044-2412
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.382 inches and 0.412 inches -
Fastener Length
Between 1.132 inches and 1.162 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-389-9349 MPN ST3M455-3L5-1Close Tolerance Screw
- 5305-00-508-2777 MPN LS15267V3-39Machine Screw
- 5305-01-399-6096 MPN 3M927-3L19Close Tolerance Screw
- 5305-01-406-3075 MPN 3M925C3-11AClose Tolerance Screw
- 5306-00-193-0886 MPN 3M33-4D15Close Tolerance Bolt
- 5306-00-990-6916 MPN VFK100G-06004Shear Bolt
- 5306-01-045-9538 MPN VAL23608-3-7Shoulder Bolt
- 5306-01-054-3405 MPN C7521-4D5Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-215-5793 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2412 | Boeing Company, The |
LD111-0044-2412 | Sps Technologies, Llc |
LD111-0044-2412 | Valley-todeco, Inc. |
LD111-0044-2412 | Arconic Global Fasteners & Rings, |
LD111-00-44-2412 | Huck International, Inc. |
LD111-0044-2412 | J.w. Manufacturing, Inc |
LD111-0044-2412 | Sps Technologies, Llc |
LD111-0044-2412 | Sps Technologies, Llc |
LD111-0044-2412 | Sonic Industries Inc. |
LD111-0044-2412 | Hi-shear Corporation |
LD111-0044-2412 | Sps Technologies, Llc |
LD111-0044-2412 | Lisi Aerospace Canada Corp |