NSN 5305-01-049-4054
High Torque Screw
Between 1.705 inches and 1.735 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number BACB30LH3U22 for national stock number 5305010494054.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-049-4054.
-
MPN or Model
BACB30LH3U22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 1.705 inches and 1.735 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
81205-bacs12lh professional/industrial association standard
More from these suppliers
- 5305-01-496-1418 MPN TX1024C5D16-5AClose Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5306-00-143-2286 MPN VFK100G-05020Shear Bolt
- 5306-01-044-6542 MPN VAL23607-3-18Shoulder Bolt
- 5306-01-142-7178 MPN VAL23607-4-31Shoulder Bolt
- 5306-01-203-0905 MPN BACB30LJ8DU21Close Tolerance Bolt
- 5306-01-294-8105 MPN VCG0009L7-21Machine Bolt
- 5306-01-330-9784 MPN VCC0090-4-12Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-049-4054 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3U22 | Huck International, Inc. |
BACB30LH3U22 | The Boeing Company |
BACB30LH3U22 | Sps Technologies, Llc |
BACB30LH3U22 | Valley-todeco, Inc. |
BACB30LH3U22 | Federal Manufacturing Corporation |
BACB30LH3U22 | Sps Technologies, Llc |
BACB30LH3U22 | Sps Technologies, Llc |
BACB30LH3U22 | Huck Intl Inc |