NSN 5305-01-223-9487
High Torque Screw
Between 0.813 inches and 0.860 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number NAS336CA6 for national stock number 5305012239487.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-223-9487.
-
MPN or Model
NAS336CA6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.615 inches and 0.682 inches -
Fastener Length
Between 0.813 inches and 0.860 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.375 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Width Across Flats
Between 0.2197 inches and 0.2217 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 5905-00-102-5279 MPN 6083741Composition Fixed Resistor
- 5930-00-615-7892 MPN 6116133Rotary Switch
- 5935-00-864-5095 MPN 6048783Electrical Receptacle Connector
- 5945-01-119-4015 MPN 6096697-1Electromagnetic Relay
- 5975-01-286-2330 MPN 6248012-1Blank Panel
- 5975-01-549-2814 MPN 260A809-1Electrical Nonmetallic Conduit Assembly
- 1680-01-555-4448 MPN 207A145-1 Cable Support Brkt
- 1680-01-555-4473 MPN 235A951-1A Flir Stwg Bushing
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-223-9487 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CA6 | National Aerospace Standards |
201A612-1 | Lockheed Martin Corporation |