NSN 5305-01-234-2564
High Torque Screw
Internal drive ribbed.
Manufacturer part number LD111-0044-2516 for national stock number 5305012342564.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-234-2564.
-
MPN or Model
LD111-0044-2516
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.452 inches and 0.482 inches -
Fastener Length
Between 1.452 inches and 1.482 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
- 5305-01-454-0974 MPN LD111-0046-2415Machine Screw
- 5306-00-594-7664 MPN VAL23033-3-10Close Tolerance Bolt
- 5306-01-009-6694 MPN VEP220121-3F22Shear Bolt
- 5306-01-068-1870 MPN VFK100G-04030Shear Bolt
- 5306-01-157-8358 MPN 4057T14P03Externally Relieved Body Bolt
- 5306-01-202-2025 MPN BACB30LM6U69Shear Bolt
- 5306-01-332-3136 MPN VAL23001-9D024Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-234-2564 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2516 | Boeing Company, The |
LD111-0044-2516 | Sps Technologies, Llc |
LD111-0044-2516 | Valley-todeco, Inc. |
LD111-0044-2516 | Arconic Global Fasteners & Rings, |
LD111-0044-2516 | J.w. Manufacturing, Inc |
LD111-0044-2516 | Sps Technologies, Llc |
LD111-0044-2516 | Sps Technologies, Llc |
LD111-0044-2516 | Sonic Industries Inc. |
LD111-0044-2516 | Hi-shear Corporation |
LD111-0044-2516 | Sps Technologies, Llc |
LD111-0044-2516 | Lisi Aerospace Canada Corp |