NSN 5305-01-236-1680
High Torque Screw
Between 1.312 inches and 1.342 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number HT4025L6-11 for national stock number 5305012361680.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-236-1680.
-
MPN or Model
HT4025L6-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.614 inches and 0.664 inches -
Fastener Length
Between 1.312 inches and 1.342 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2636 MPN LS15262V3-9Machine Screw
- 5305-00-868-1927 MPN HT408A-4-5Close Tolerance Screw
- 5305-01-057-3065 MPN BACB30ABP8-39AClose Tolerance Screw
- 5305-01-105-9373 MPN 3M926-3L2Close Tolerance Screw
- 5305-01-107-0035 MPN C7984-4-11Close Tolerance Screw
- 5305-01-132-5286 MPN HT8137-5-13ASClose Tolerance Screw
- 5305-01-134-8728 MPN 79901HD-4-12Close Tolerance Screw
- 5305-01-142-8404 MPN HT4020-5-13YShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-236-1680 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L6-11 | Huck International, Inc. |
ST3M454-6L11 | Boeing Company, The |
11905-6L11 | Reid Products Inc. |
ST3M454-6L11 | Alcoa Global Fasteners, Inc. |
HT4025L6-11 | Hi-shear Corporation |
HT4025L6-11 | Sps Technologies, Llc |
HT4025L6-11 | Lisi Aerospace Canada Corp |
HT4025L6-11 | Huck Intl Inc |
HT4025L6-11 | Arconic Global Fasteners & Rings, |
HT4025L6-11 | Alcoa Global Fasteners, Inc. |