NSN 5305-01-249-0460
High Torque Screw
Internal drive ribbed.
Manufacturer part number SC1779-3-2 for national stock number 5305012490460.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-249-0460.
-
MPN or Model
SC1779-3-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.225 inches and 0.292 inches -
Fastener Length
Between 0.443 inches and 0.490 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
- 5305-01-462-2840 MPN 3M1169V4-9AClose Tolerance Screw
- 5305-01-512-8385 MPN TX1024C4-2-5AClose Tolerance Screw
- 5306-00-400-5741 MPN VFK100G-07018Shear Bolt
- 5306-00-900-5282 MPN VFK100G-05066Shear Bolt
- 5306-01-044-2988 MPN VAL23607-4D10Shoulder Bolt
- 5306-01-044-5188 MPN VAL23607-6D17Shoulder Bolt
- 5306-01-045-9525 MPN VAL23033-9XD24Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-249-0460 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1779-3-2 | Arconic Global Fasteners & Rings, |
PBF1202-3-2 | Sps Technologies, Llc |
HR204-3-2 | Hi-shear Corporation |
106706T-3-2 | Sps Technologies, Llc |
HR204-3-2 | Lisi Aerospace Canada Corp |
GB510FG3-2 | Northrop Grumman Systems Corporation |
GB510FG3-2 | Valley-todeco, Inc. |
GB510CE3-2 | Northrop Grumman Systems Corporation |