NSN 5305-01-253-4860
High Torque Screw
Between 0.828 inches and 0.875 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT4027-4-6 for national stock number 5305012534860.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-253-4860.
-
MPN or Model
HT4027-4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 0.828 inches and 0.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
7500 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-935-7579 MPN HT409A4-19Shoulder Screw
- 5305-00-935-7580 MPN H804-632-16Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-027-5253 MPN HT4028L5-4Close Tolerance Screw
- 5305-01-330-0712 MPN SC200A1032-6Machine Screw
- 5305-01-346-3753 MPN CHT4068-4-13Close Tolerance Screw
- 5305-01-406-3576 MPN HT4024L9-21Close Tolerance Screw
- 5305-01-435-8691 MPN BACB30LU9-56Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-253-4860 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4027-4-6 | Sps Technologies, Llc |
WC4027-4-6 | West Coast Aerospace Inc |
HT4027-4-6 | Hi-shear Corporation |
HT4027-4-6 | Arconic Global Fasteners & Rings, |
HT4027-4-6 | Lisi Aerospace Canada Corp |
HT4027-4-6 | Sps Technologies, Llc |
HT4027-4-6 | Alcoa Global Fasteners, Inc. |
HT4027-4-6 | Huck International, Inc. |
HT4027-4-6 | Huck Intl Inc |
HT4027-4-6 | Arconic Global Fasteners & Rings, |