NSN 5305-01-261-1901
High Torque Screw
0.0156 in. Oversize shank for repair work only.
Manufacturer part number 51B335-9X for national stock number 5305012611901.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-261-1901.
-
MPN or Model
51B335-9X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.365 inches and 0.385 inches -
Fastener Length
Between 0.928 inches and 0.948 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.626 inches and 0.635 inches -
Grip Diameter
Between 0.326 inches and 0.327 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.553 inches and 0.573 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Chromium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-00-151-8662 MPN AIC551C3-278Shoulder Screw
- 5305-00-505-2678 MPN LS15262V4-10Machine Screw
- 5305-00-969-4374 MPN C079-4-13Close Tolerance Screw
- 5305-01-050-9003 MPN AIC984-5-14Close Tolerance Screw
- 5305-01-082-2029 MPN CVC241AC4-9Machine Screw
- 5305-01-201-9382 MPN AIC4037-04-30Machine Screw
- 5305-01-243-9360 MPN SM-C-800983-19Socket Head Cap Screw
- 5305-01-328-6171 MPN LE111-0032-2203Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-261-1901 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B335-9X | Northrop Grumman Technical Services, |
51B335-9X | Sps Technologies, Llc |
51B335-9X | Arconic Global Fasteners & Rings, |
51B335-9X | Sps Technologies, Llc |
51B335-9X | Hi-shear Corporation |
51B335-9X | Sps Technologies, Llc |
51B335-9X | Alcoa Global Fasteners, Inc. |
51B335-9X | Lisi Aerospace Canada Corp |
51B335-9X | Northrop Grumman Systems Corporation |