NSN 5305-01-264-1477
High Torque Screw
Between 1.646 inches and 1.676 inches fastener length, flat countersunk head style, between 0.826 inches and 0.888 inches head diameter, grip diameter: between 0.4365 inches and 0.4370 inches .
Manufacturer part number LD111-0029-0717 for national stock number 5305012641477.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-264-1477.
-
MPN or Model
LD111-0029-0717
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.574 inches and 0.624 inches -
Fastener Length
Between 1.646 inches and 1.676 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.826 inches and 0.888 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-129-4432 MPN AIC944-3-11Machine Screw
- 5305-01-329-9738 MPN AIC1700-4-13AClose Tolerance Screw
- 5305-01-381-2350 MPN AIC818-6-525CSocket Head Cap Screw
- 5305-01-462-2697 MPN TX1026D6-19AClose Tolerance Screw
- 5305-01-477-5659 MPN TX1026V5-14AClose Tolerance Screw
- 5305-01-497-0829 MPN TX1027C4-2AClose Tolerance Screw
- 5305-01-580-9961 MPN BACB30XD3K4Close Tolerance Screw
- 5305-01-646-1875 MPN JSFB22V3-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-264-1477 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0029-0717 | Boeing Company, The |
LD111-0044-0717 | Boeing Company, The |
LD111-0044-0717 | J.w. Manufacturing, Inc |
LD111-0044-0717 | Sps Technologies, Llc |
LD111-0044-0717 | Sps Technologies, Llc |
LD111-0044-0717 | Arconic Global Fasteners & Rings, |
LD111-0044-0717 | Huck International, Inc. |
LD111-0044-0717 | Sps Technologies, Llc |
LD111-0044-0717 | Sps Technologies, Llc |
LD111-0044-0717 | Sonic Industries Inc. |
LD111-0044-0717 | Hi-shear Corporation |
LD111-0044-0717 | Lisi Aerospace Canada Corp |