NSN 5305-01-266-8383
High Torque Screw
Between 1.140 inches and 1.170 inches fastener length, flat countersunk head style, between 0.578 inches and 0.634 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number LD111-0044-2511 for national stock number 5305012668383.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-266-8383.
-
MPN or Model
LD111-0044-2511
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.452 inches and 0.482 inches -
Fastener Length
Between 1.140 inches and 1.170 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.634 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-7704 MPN AIC812-06-4Machine Screw
- 5305-00-316-8116 MPN AIC818-3-206CSocket Head Cap Screw
- 5305-00-903-2197 MPN AIC813-06-R34Machine Screw
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-067-5838 MPN AIC984-3-17PClose Tolerance Screw
- 5305-01-265-4912 MPN LE111-0035-2308Close Tolerance Screw
- 5305-01-351-8781 MPN AIC4410-3-8Close Tolerance Screw
- 5305-01-381-2281 MPN 1701-4-13Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-266-8383 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2511 | Sps Technologies, Llc |
LD111-0044-2511 | Arconic Global Fasteners & Rings, |
LD111-0044-2511 | Sps Technologies, Llc |
LD111-0044-2511 | Huck International, Inc. |
LD111-0044-2511 | Sps Technologies, Llc |
LD111-0044-2511 | Sonic Industries Inc. |
LD111-0044-2511 | Sps Technologies, Llc |
LD111-0044-2511 | Hi-shear Corporation |
LD111-0044-2511 | Lisi Aerospace Canada Corp |
LD111-0044-2511 | Boeing Company, The |