NSN 5305-01-268-5682
High Torque Screw
Between 1.016 inches and 1.046 inches fastener length, fillister countersunk head style, between 0.390 inches and 0.395 inches head diameter, head height: 0.015 inches .
Manufacturer part number HT4024L4D9-1 for national stock number 5305012685682.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-268-5682.
-
MPN or Model
HT4024L4D9-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.895 inches first hole and 0.935 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-324-8494 MPN HT8137-4-9Close Tolerance Screw
- 5305-00-460-4669 MPN VT1040-4-2Close Tolerance Screw
- 5305-00-503-5695 MPN LS15234C4-3Close Tolerance Screw
- 5305-00-765-3281 MPN BACB30LU4-19Machine Screw
- 5305-01-054-4634 MPN BACB30LU4-16Close Tolerance Screw
- 5305-01-110-9771 MPN CHT4067-4-8AClose Tolerance Screw
- 5305-01-132-2177 MPN HT4028L5-12Close Tolerance Screw
- 5305-01-141-7195 MPN 3M902C5-9AShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-268-5682 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4024L4D9-1 | Huck International, Inc. |
HT4024L4D9-1 | Arconic Global Fasteners & Rings, |
ST3M455-4LD-9-1 | Boeing Company, The |
11907-4LD-9-1 | Reid Products Inc. |
HT4024L4D9-1 | Huck Intl Inc |
HT4024L4D9-1 | Sps Technologies, Llc |
HT4024L4D9-1 | Alcoa Global Fasteners, Inc. |
HT4024L4D9-1 | Hi-shear Corporation |
ST3M455-4LD-9-1 | Boeing Company, The |
HT4024L4D9-1 | Hi-shear Corporation |
HT4024L4D9-1 | Sps Technologies, Llc |
HT4024L4D9-1 | Alcoa Global Fasteners, Inc. |
HT4024L4D9-1 | Huck Intl Inc |