NSN 5305-01-271-1797
High Torque Screw
Between 1.194 inches and 1.224 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0044-2413 for national stock number 5305012711797.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-271-1797.
-
MPN or Model
LD111-0044-2413
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
Between 1.194 inches and 1.224 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-452-1676 MPN LD111-0045-2417Close Tolerance Screw
- 5306-00-321-9332 MPN VAL23029-5D18Close Tolerance Bolt
- 5306-01-037-3414 MPN 9134M82-P02Shoulder Bolt
- 5306-01-049-2991 MPN BACB30NE3-33Shear Bolt
- 5306-01-116-4392 MPN VAL23044-2Internally Relieved Body Bolt
- 5306-01-117-2397 MPN VCG0001-10D68Close Tolerance Bolt
- 5306-01-134-0727 MPN 3M892-14H34Close Tolerance Bolt
- 5306-01-212-3454 MPN BACB30LM4H4Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-271-1797 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2413 | Boeing Company, The |
LD111-0044-2413 | Sps Technologies, Llc |
LD111-0044-2413 | Arconic Global Fasteners & Rings, |
LD111-0044-2413 | Sps Technologies, Llc |
LD111-0044-2413 | Sps Technologies, Llc |
LD111-0044-2413 | Sonic Industries Inc. |
LD111-0044-2413 | Hi-shear Corporation |
LD111-0044-2413 | Lisi Aerospace Canada Corp |
LD111-0044-2413 | Valley-todeco, Inc. |
LD111-0044-2413 | Sps Technologies, Llc |