NSN 5305-01-271-1798
High Torque Screw
Between 1.327 inches and 1.357 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number LD111-0044-2514 for national stock number 5305012711798.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-271-1798.
-
MPN or Model
LD111-0044-2514
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.467 inches -
Fastener Length
Between 1.327 inches and 1.357 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-145-0967 MPN NAS1101C08-36Machine Screw
- 5305-00-242-4813 MPN AIC812-02-3Machine Screw
- 5305-00-942-5314 MPN 524505Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-050-9001 MPN AIC984-3-9PClose Tolerance Screw
- 5305-01-188-7592 MPN LE111-0038-2408Close Tolerance Screw
- 5305-01-196-5089 MPN AIC9535-7-38Close Tolerance Screw
- 5305-01-272-4771 MPN AIC4043V3-12RMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-271-1798 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-2514 | Boeing Company, The |
LD111-0044-2514 | Sps Technologies, Llc |
LD111-0044-2514 | Arconic Global Fasteners & Rings, |
LD111-0044-2514 | Sps Technologies, Llc |
LD111-0044-2514 | Sps Technologies, Llc |
LD111-0044-2514 | Sonic Industries Inc. |
LD111-0044-2514 | Hi-shear Corporation |
LD111-0044-2514 | Lisi Aerospace Canada Corp |