NSN 5305-01-276-4874
High Torque Screw
Between 1.334 inches and 1.381 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 106706T-4-A15 for national stock number 5305012764874.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-276-4874.
-
MPN or Model
106706T-4-A15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.315 inches and 0.453 inches -
Fastener Length
Between 1.334 inches and 1.381 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 federal specification single treatment response or mil-c-8837 ty2 cl2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-347-7830 MPN LS15265V4-5Close Tolerance Screw
- 5305-00-459-9865 MPN VT1040-4-15Close Tolerance Screw
- 5305-00-541-9344 MPN HT4025L4D14Close Tolerance Screw
- 5305-00-845-9073 MPN C082-4-34Machine Screw
- 5305-01-043-4301 MPN HT8043-5-10Close Tolerance Screw
- 5305-01-048-1139 MPN HT4011-8-9Shoulder Screw
- 5305-01-049-4053 MPN HT4024L8-12MClose Tolerance Screw
- 5305-01-206-7260 MPN HT4068-3D6AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-276-4874 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106706T-4-A15 | Sps Technologies, Llc |
HR204JK-4-15 | Hi-shear Corporation |
GB510CE4-15 | Northrop Grumman Systems Corporation |
HR204JK-4-15 | Lisi Aerospace Canada Corp |
SCD1779-4-15 | Arconic Global Fasteners & Rings, |
PB1202-4-15 | Harter Group The |
GB510CE4-15 | Harter Group The |
GB510CE4-15 | Northrop Grumman Systems Corporation |
HR204JK-4-15 | Hi-shear Corporation |
106706T-4-A15 | Sps Technologies, Llc |
SCD1779-4-15 | Arconic Global Fasteners & Rings, |
PB1202-4-15 | Harter Group The |