NSN 5305-01-280-6743
High Torque Screw
Between 1.954 inches and 1.984 inches fastener length, flat countersunk head style, between 0.456 inches and 0.508 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4025L4D24 for national stock number 5305012806743.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-280-6743.
-
MPN or Model
HT4025L4D24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.954 inches and 1.984 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.456 inches and 0.508 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.848 inches first hole and 1.858 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-227-1399 MPN HT1030-5-11Shoulder Screw
- 5305-00-292-5492 MPN HT410A4-19Close Tolerance Screw
- 5305-01-131-2934 MPN HT4057-5-11AClose Tolerance Screw
- 5305-01-132-4366 MPN HT4025L4-6Close Tolerance Screw
- 5305-01-141-7896 MPN HT4049-4-11XShoulder Screw
- 5305-01-333-9890 MPN SC5053-3-8Close Tolerance Screw
- 5305-01-337-6985 MPN HT4075VS4-12-55Close Tolerance Screw
- 5305-01-435-5747 MPN BACB30LU8-25Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-280-6743 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L4D24 | Arconic Global Fasteners & Rings, |
ST3M454-4DL24 | Boeing Company, The |
11905-4DL24 | Reid Products Inc. |
ST3M454-4DL24 | Alcoa Global Fasteners, Inc. |
HT4025L4D24 | Hi-shear Corporation |
HT4025L4D24 | Sps Technologies, Llc |
HT4025L4D24 | Lisi Aerospace Canada Corp |
HT4025L4D24 | Alcoa Global Fasteners, Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)