NSN 5305-01-295-5621
High Torque Screw
Between 0.603 inches and 0.623 inches fastener length, flat countersunk head style, 0.3813 inches head diameter, grip diameter: between 0.2197 inches and 0.2207 inches .
Manufacturer part number NAS1580A3T4Y for national stock number 5305012955621.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-295-5621.
-
MPN or Model
NAS1580A3T4Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.603 inches and 0.623 inches -
Head Style
Flat countersunk -
Head Diameter
0.3813 inches -
Grip Diameter
Between 0.2197 inches and 0.2207 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.1900 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-00-159-0252 MPN 706S3Stud Terminal
- 5940-01-452-6925 MPN NAS1063A11-172GTerminal Board Marker Strip
- 5305-00-004-5069 MPN MS27039-5-17Machine Screw
- 5305-00-035-5382 MPN NAS1581A3H11Close Tolerance Screw
- 5305-00-057-0514 MPN MS51958-17Machine Screw
- 5305-00-067-9900 MPN NASM51861-60Tapping Screw
- 5305-00-115-9769 MPN NAS1623-12DMachine Screw
- 5305-00-141-6282 MPN NAS1191E04P18LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-295-5621 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3T4Y | National Aerospace Standards |