NSN 5305-01-304-1327
High Torque Screw
Between 0.891 inches and 0.921 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number MA21165-3-8F for national stock number 5305013041327.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-304-1327.
-
MPN or Model
MA21165-3-8F
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.891 inches and 0.921 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Features Provided
Cetyl alcohol lubricant -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-298-6237 MPN AIC984-3-9RClose Tolerance Screw
- 5305-01-330-7088 MPN AIC1652-8-12AClose Tolerance Screw
- 5305-01-378-8791 MPN AIC4043-04-46Machine Screw
- 5305-01-381-1927 MPN AIC818-4-309CSocket Head Cap Screw
- 5305-01-417-3845 MPN TX1024D3-7-5Close Tolerance Screw
- 5305-01-435-8670 MPN BACB30LU9-51Close Tolerance Screw
- 5305-01-512-8294 MPN TX1027C6-16AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-304-1327 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MA21165-3-8F | Abounding Security Inc |
AIC1165-3-8P | Sps Technologies, Llc |
SC1823-3-8P | Arconic Global Fasteners & Rings, |
AIC1147-3-8P | Sps Technologies, Llc |
12455-3-8F | Sps Technologies, Llc |
VT1731-3-8P | Alcoa Global Fasteners, Inc. |
11843-3-8F | Reid Products Inc. |
HR249-3-8BJ | Hi-shear Corporation |
HR249-3-8BJ | Lisi Aerospace Canada Corp |
3M1165-3-8F | Boeing Company, The |