1-321-802-5889
Email Us

NSN 5305-01-310-9250

High Torque Screw

About this product

1.294 inches fastener length, fillister countersunk head style, between 0.690 inches and 0.710 inches head diameter, head height: between 0.130 inches and 0.143 inches .

Manufacturer part number AIC9535-8-8 for national stock number 5305013109250.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-310-9250.

  • MPN or Model

    AIC9535-8-8

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.779 inches and 0.809 inches
  • Fastener Length
    1.294 inches
  • Head Style
    Fillister countersunk
  • Head Diameter
    Between 0.690 inches and 0.710 inches
  • Head Height
    Between 0.130 inches and 0.143 inches
  • Grip Diameter
    Between 0.4985 inches and 0.4995 inches
  • Single Shear Strength
    132000 pounds per square inch
  • Internal Drive Style
    Offset cruciform (torque set)
  • Thread Diameter
    0.500 inches
  • Grip Length
    Between 0.490 inches and 0.510 inches
  • Thready Qty Per Inch (tpi)
    20
  • Min. Tensile Strength (psi)
    220000 pounds per square inch
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Material
    Steel
  • Material Specification
    Ams6487 assn standard single material response
  • Surface Treatment
    Cadmium
  • Surface Treatment Specification
    Nas672 assn standard single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-310-9250 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305013109250

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
AIC9535-8-8 Sps Technologies, Llc
C9535-8-8 Lockheed Martin Corporation
VT1696-8-8 Alcoa Global Fasteners, Inc.
AIC9535-8-8 Sps Technologies, Llc
C9535-8-8 Lockheed Martin Corporation
VT1696-8-8 Alcoa Global Fasteners, Inc.
AIC9535-8-8 Sps Technologies, Llc
C9535-8-8 Lockheed Martin Corporation
VT1696-8-8 Alcoa Global Fasteners, Inc.
AIC9535-8-8 Sps Technologies, Llc
C9535-8-8 Lockheed Martin Corporation
VT1696-8-8 Alcoa Global Fasteners, Inc.
AIC9535-8-8 Sps Technologies, Llc
VT1696-8-8 Alcoa Global Fasteners, Inc.
C9535-8-8 Lockheed Martin Corporation
AIC9535-8-8 Sps Technologies, Llc
C9535-8-8 Lockheed Martin Corporation
VT1696-8-8 Alcoa Global Fasteners, Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.