NSN 5305-01-312-0704
High Torque Screw
Between 1.825 inches and 1.855 inches fastener length, flat countersunk head style, between 1.214 inches and 1.272 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number NAS1980-15H for national stock number 5305013120704.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-312-0704.
-
MPN or Model
NAS1980-15H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.877 inches and 0.927 inches -
Fastener Length
Between 1.825 inches and 1.855 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.214 inches and 1.272 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Single Shear Strength
108000 pounds per square inch -
Internal Drive Style
High-torque -
Thread Diameter
0.625 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1980 professional/industrial association standard
More from these suppliers
- 5940-00-857-3414 MPN NAS1746-2Conductor Splice
- 5940-00-954-6759 MPN NAS1746-7Conductor Splice
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-007-1587 MPN NAS1102E02-5PMachine Screw
- 5305-00-008-5813 MPN NAS1742C06R10Socket Head Cap Screw
- 5305-00-043-0543 MPN NAS604-40Machine Screw
- 5305-00-052-8886 MPN MS24630-22Tapping Screw
- 5305-00-054-9255 MPN MS51047-34Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-312-0704 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1980-15H | National Aerospace Standards |