NSN 5305-01-330-6349
High Torque Screw
Between 1.142 inches and 1.172 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HR239-3-13 for national stock number 5305013306349.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-330-6349.
-
MPN or Model
HR239-3-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 1.142 inches and 1.172 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-308-1578 MPN AIC811-04-12Socket Head Cap Screw
- 5305-00-508-2718 MPN AIC551C3-708Shoulder Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-01-101-2012 MPN AIC812-06-16Machine Screw
- 5305-01-169-0017 MPN LD111-0044-2410Close Tolerance Screw
- 5305-01-324-8962 MPN 68A250582-1003Shoulder Screw
- 5305-01-358-9252 MPN AIC4040V4-05RClose Tolerance Screw
- 5305-01-381-1902 MPN AIC1701-3-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-330-6349 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR239-3-13 | Hi-shear Corporation |
HR239-3-13 | Lisi Aerospace Canada Corp |
AIC1651-3-13 | Sps Technologies, Llc |
SC3103-3-13 | Arconic Global Fasteners & Rings, |
SLB216-3-13 | Space-lok, Inc. |
E008-3-13 | Huck International, Inc. |
03A173-3-13 | Northrop Grumman Systems Corporation |
PBF1416-3-13 | Sps Technologies, Llc |
BF0015HC3-3-13 | Lfc Industries Inc. |
123742-3-13 | Sps Technologies, Llc |
E008-3-13 | Huck Intl Inc |
03A173-3-13 | Oic Valve Corp |