NSN 5305-01-334-4647
High Torque Screw
Between 0.786 inches and 0.816 inches fastener length, flat countersunk head style, between 0.3206 inches and 0.4045 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number AIC1701-3-7 for national stock number 5305013344647.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-334-4647.
-
MPN or Model
AIC1701-3-7
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.786 inches and 0.816 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3206 inches and 0.4045 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-177-5561 MPN CVC241-3-10Machine Screw
- 5305-00-351-9122 MPN LS15266V3-3Close Tolerance Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-526-1038 MPN BACB30LU3-5Close Tolerance Screw
- 5305-00-802-4669 MPN 51B221-8Close Tolerance Screw
- 5305-01-014-8454 MPN NAS1101E02-7Machine Screw
- 5305-01-054-6241 MPN AIC9535-6-28Close Tolerance Screw
- 5305-01-060-9602 MPN AIC984-6-32PClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-334-4647 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1701-3-7 | Sps Technologies, Llc |
SC5053-3-7 | Arconic Global Fasteners & Rings, |
111395-3-7 | Sps Technologies, Llc |
3D0080-3-7 | Boeing Company, The |
1701-3-7 | Sps Technologies, Llc |