NSN 5305-01-342-9046
High Torque Screw
Between 1.807 inches and 1.837 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number ST3M751-6-22 for national stock number 5305013429046.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-342-9046.
-
MPN or Model
ST3M751-6-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.447 inches -
Fastener Length
Between 1.807 inches and 1.837 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.688 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-357-1869 MPN ST3M466V4L7-1Close Tolerance Screw
- 5305-00-389-9349 MPN HT4024L3-5Close Tolerance Screw
- 5305-00-411-6536 MPN 66117H8-24Close Tolerance Screw
- 5305-00-465-5491 MPN SFH26-5A36Close Tolerance Screw
- 5305-00-505-4010 MPN LS15235C4-44Close Tolerance Screw
- 5305-00-604-0414 MPN NAS1190E02P16NSocket Head Cap Screw
- 5305-00-680-5429 MPN NAS1204-52Close Tolerance Screw
- 5305-00-821-6005 MPN NAS1221-06-24Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-342-9046 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M751-6-22 | Boeing Company, The |
ST3M751-6-22 | Sps Technologies, Llc |
ST3M751-6-22 | Boeing Company, The |
ST3M751-6-22 | Sps Technologies, Llc |