NSN 5305-01-343-7241
High Torque Screw
Between 1.267 inches and 1.297 inches fastener length, flat countersunk head style, between 0.515 inches and 0.566 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1581C6H11 for national stock number 5305013437241.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-343-7241.
-
MPN or Model
NAS1581C6H11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 1.267 inches and 1.297 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.515 inches and 0.566 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5935-00-471-9923 MPN NAS1650R22B41PNElectrical Receptacle Connector
- 1680-00-226-0555 MPN NAS303-25-5133Arrestin Cable Assy
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-007-0217 MPN NAS1625-2Machine Screw
- 5305-00-009-5709 MPN NAS1100C06-10PMachine Screw
- 5305-00-051-4496 MPN MS51973-18Setscrew
- 5305-00-075-3085 MPN MS35308-457Hexagon Head Cap Screw
- 5305-00-079-2588 MPN NAS1154-29Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-343-7241 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C6H11 | National Aerospace Standards |