NSN 5305-01-348-2678
High Torque Screw
Between 0.573 inches and 0.603 inches fastener length, flat chamfer head style, between 0.221 inches and 0.226 inches head diameter, head height: between 0.074 inches and 0.086 inches .
Manufacturer part number NAS1121E5 for national stock number 5305013482678.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-348-2678.
-
MPN or Model
NAS1121E5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.573 inches and 0.603 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.221 inches and 0.226 inches -
Head Height
Between 0.074 inches and 0.086 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1121 professional/industrial association standard
More from these suppliers
- 5940-01-396-9990 MPN NAS1063A6-TB9MTerminal Board Marker Strip
- 1560-01-611-3884 MPN 63-1997-2Aircraft Structural Component Support
- 5305-00-005-5974 MPN NAS1102E3-6Machine Screw
- 5305-00-007-0279 MPN NAS1100C06-14PMachine Screw
- 5305-00-007-6201 MPN NAS1102C04-9Machine Screw
- 5305-00-043-3642 MPN MS51964-37Setscrew
- 5305-00-051-4097 MPN MS90725-255Hexagon Head Cap Screw
- 5305-00-053-9355 MPN MS35191-259Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-348-2678 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1121E5 | National Aerospace Standards |