NSN 5305-01-349-4197
High Torque Screw
Between 0.721 inches and 0.768 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number GB510FG4-5 for national stock number 5305013494197.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-349-4197.
-
MPN or Model
GB510FG4-5
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 0.721 inches and 0.768 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-130-6555 MPN SC2671-3-10Machine Screw
- 5305-01-350-4207 MPN VCL0009-3D4Close Tolerance Screw
- 5305-01-435-3850 MPN BACB30LU7-35Close Tolerance Screw
- 5306-00-121-8184 MPN VFK100G-07034Shear Bolt
- 5306-00-205-3700 MPN BACB30NE6-18Close Tolerance Bolt
- 5306-01-057-8129 MPN VFK101G12-034Shear Bolt
- 5306-01-067-8530 MPN VAL23033-4H44Shear Bolt
- 5306-01-141-0439 MPN VAL23029-6-11Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-349-4197 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB510FG4-5 | Northrop Grumman Systems Corporation |
GB510FG4-5 | Valley-todeco, Inc. |
GB510FG4-5 | Sps Technologies, Llc |
GB510FG4-5 | Sps Technologies, Llc |
PBF1475-4-5 | Sps Technologies, Llc |
VCL0009-4-5 | Valley-todeco, Inc. |
124379-4-5 | Sps Technologies, Llc |
GB510FG4-5 | Northrop Grumman Systems Corporation |
VCL0009-4-5 | Valley-todeco, Inc. |
PBF1475-4-5 | Sps Technologies, Llc |
124379-4-5 | Sps Technologies, Llc |