NSN 5305-01-350-4548
High Torque Screw
Between 1.194 inches and 1.225 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 1128CSM46503-13 for national stock number 5305013504548.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-350-4548.
-
MPN or Model
1128CSM46503-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.819 inches and 0.850 inches -
Fastener Length
Between 1.194 inches and 1.225 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.075 inches first hole and 0.080 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.375 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
165000 pounds per square inch -
Hardness Rating
37.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.124 inches first hole and 1.155 inches first hole -
Material
Steel comp 4130 or steel comp 4140 or steel comp 4340 or steel comp 6150 or steel comp 8630 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-001-1876 MPN 123SCAV5612-1Waveguide Assembly
- 5935-00-001-3132 MPN GA800PR16-3Electrical Connector Backshell
- 1680-00-019-8213 MPN 123AM40054-1Carg Pulley Support
- 5935-00-061-3241 MPN GC825AT-35P4Electrical Plug Connector
- 1560-00-075-8218 MPN 128CM12041-1Control Link Assembly
- 5930-00-089-8274 MPN 128SCAV250-103Toggle Switch
- 1560-00-276-9288 MPN 123CSM10102-1Fitting Assembly
- 1560-00-312-7725 MPN 123BM10418-512Access Door Support
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-350-4548 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1128CSM46503-13 | Northrop Grumman Systems Corporation |
1128CSM46503-13 | Northrop Grumman Systems Corporation |
1128CSM46503-13 | Delpo Precision Tool And |
1128CSM46503-13 | D F P Manufacturing Corp |