NSN 5305-01-350-4553
High Torque Screw
Between 0.666 inches and 0.696 inches fastener length, oval head style, between 0.427 inches and 0.447 inches head diameter, head height: between 0.075 inches and 0.080 inches .
Manufacturer part number 3D0160-3-4 for national stock number 5305013504553.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-350-4553.
-
MPN or Model
3D0160-3-4
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.431 inches -
Fastener Length
Between 0.666 inches and 0.696 inches -
Head Style
Oval -
Head Diameter
Between 0.427 inches and 0.447 inches -
Head Height
Between 0.075 inches and 0.080 inches -
Grip Diameter
Between 0.1885 inches and 0.1890 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-01-056-4220 MPN AIC986-10-52Close Tolerance Screw
- 5305-01-462-2754 MPN TX1027D5-7AClose Tolerance Screw
- 5305-01-627-4663 MPN JSFB34V4-7Machine Screw
- 5306-01-096-1224 MPN SS5025-04H010Machine Bolt
- 5306-01-112-7899 MPN SS5025-07-019Shear Bolt
- 5306-01-286-3506 MPN AIC752-12H28Shear Bolt
- 5306-01-331-1266 MPN AIC2264A06U024Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-350-4553 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3D0160-3-4 | Boeing Company, The |
AIC1515-3-4 | Sps Technologies, Llc |
SC5063-3-4 | Arconic Global Fasteners & Rings, |