NSN 5305-01-351-0812
High Torque Screw
Between 1.176 inches and 1.206 inches fastener length, fillister head style, between 0.365 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number NAS1124E14P for national stock number 5305013510812.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-351-0812.
-
MPN or Model
NAS1124E14P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.176 inches and 1.206 inches -
Head Style
Fillister -
Head Diameter
Between 0.365 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1124 professional/industrial association standard
More from these suppliers
- 5940-01-391-1827 MPN NAS1063A4-TB138HTerminal Board Marker Strip
- 5940-01-455-3510 MPN NAS1063A4-138AKTerminal Board Marker Strip
- 5305-00-008-9114 MPN NAS1190E02T6LSocket Head Cap Screw
- 5305-00-051-6981 MPN MS27039DD4-28Machine Screw
- 5305-00-057-4593 MPN MS16996-9Socket Head Cap Screw
- 5305-00-068-7053 MPN MS35202-43Machine Screw
- 5305-00-082-1988 MPN NAS1351C5-36Socket Head Cap Screw
- 5305-00-121-2460 MPN NAS1404-2Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-351-0812 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1124E14P | National Aerospace Standards |