NSN 5305-01-351-0814
High Torque Screw
Between 2.011 inches and 2.041 inches fastener length, flat chamfer head style, between 0.306 inches and 0.313 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123E28 for national stock number 5305013510814.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-351-0814.
-
MPN or Model
NAS1123E28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 2.011 inches and 2.041 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.306 inches and 0.313 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1123 professional/industrial association standard
More from these suppliers
- 5940-00-159-0252 MPN 706S3Stud Terminal
- 5305-00-051-0827 MPN MS90725-164Hexagon Head Cap Screw
- 5305-00-052-5936 MPN MS35198-78Machine Screw
- 5305-00-059-2501 MPN MS51976-71Setscrew
- 5305-00-061-3156 MPN NAS623-3-11Machine Screw
- 5305-00-143-3201 MPN MS21093-343Machine Screw
- 5305-00-149-8613 MPN MS51862-24CTapping Screw
- 5305-00-150-9456 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-351-0814 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123E28 | National Aerospace Standards |