NSN 5305-01-351-0815
High Torque Screw
Between 1.136 inches and 1.166 inches fastener length, flat chamfer head style, between 0.306 inches and 0.313 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1121E14 for national stock number 5305013510815.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-351-0815.
-
MPN or Model
NAS1121E14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.136 inches and 1.166 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.306 inches and 0.313 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1121 professional/industrial association standard
More from these suppliers
- 5940-00-549-8877 MPN NAS45-6-14CTerminal Board
- 5305-00-043-2683 MPN MS24694S93Machine Screw
- 5305-00-052-5693 MPN NAS1352-08H8Socket Head Cap Screw
- 5305-00-052-5940 MPN MS35198-82Machine Screw
- 5305-00-052-6917 MPN MS24629-50Tapping Screw
- 5305-00-057-3663 MPN NAS1352-6LB12PSocket Head Cap Screw
- 5305-00-068-0544 MPN MS24678-15CSocket Head Cap Screw
- 5305-00-071-2234 MPN MS90725-17Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-351-0815 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1121E14 | National Aerospace Standards |