NSN 5305-01-352-1212
High Torque Screw
Between 4.160 inches and 4.190 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number AIC1651-4-60 for national stock number 5305013521212.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-1212.
-
MPN or Model
AIC1651-4-60
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 4.160 inches and 4.190 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 3.740 inches and 3.760 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-802-2643 MPN 51B221-14Close Tolerance Screw
- 5305-01-172-8791 MPN AIC6927-4-9Machine Screw
- 5305-01-319-6514 MPN 1498M37P01Machine Screw
- 5305-01-347-3051 MPN AIC985B5-6Close Tolerance Screw
- 5305-01-357-5868 MPN AIC4463-3-29Machine Screw
- 5305-01-364-8277 MPN BACS12CK08U14Machine Screw
- 5305-01-418-9140 MPN TX1026V3-24Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-1212 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1651-4-60 | Sps Technologies, Llc |
SC3103-4-60 | Arconic Global Fasteners & Rings, |
PBF1416-4-60 | Sps Technologies, Llc |
123742-4-60 | Sps Technologies, Llc |
HR239-4-60 | Hi-shear Corporation |
HR239-4-60 | Lisi Aerospace Canada Corp |
SLB216-4-60 | Space-lok, Inc. |
E008-4-60 | Huck International, Inc. |
03A173-4-60 | Northrop Grumman Systems Corporation |
BF0015HC3-4-60 | Lfc Industries Inc. |
E008-4-60 | Huck Intl Inc |