NSN 5305-01-352-2078
High Torque Screw
Between 2.032 inches and 2.062 inches fastener length, flat countersunk head style, between 0.959 inches and 1.017 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number VCL0008-8-21 for national stock number 5305013522078.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-352-2078.
-
MPN or Model
VCL0008-8-21
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 2.032 inches and 2.062 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.959 inches and 1.017 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-522-9629 MPN ST3M454-4DL11Close Tolerance Screw
- 5305-01-338-4057 MPN BACB30NN3K22Close Tolerance Screw
- 5306-00-079-7724 MPN BACB30LM4HU12Shear Bolt
- 5306-00-205-3700 MPN BACB30NF6H18Close Tolerance Bolt
- 5306-00-958-8381 MPN STSBG003A10U026Close Tolerance Bolt
- 5306-01-006-4983 MPN J644P20CMachine Bolt
- 5306-01-011-7015 MPN VAL23033-10-24Close Tolerance Bolt
- 5306-01-045-6569 MPN VAL23608-5-5Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-352-2078 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCL0008-8-21 | Valley-todeco, Inc. |
AIC4410-8-21 | Sps Technologies, Llc |
PBF1419-8-21 | Sps Technologies, Llc |
123741-8-21 | Sps Technologies, Llc |
HR242-8-21 | Hi-shear Corporation |
03A161-8-21 | Northrop Grumman Systems Corporation |
SLB217-8-21 | Space-lok, Inc. |
X0007-8-21 | Huck International, Inc. |
03A161-8-21 | Northrop Grumman Systems Corporation |
HR242-8-21 | Lisi Aerospace Canada Corp |
X0007-8-21 | Huck Intl Inc |