NSN 5306-01-291-0687
Coaxial Connector
Between 1.918 inches and 1.948 inches fastener length, spline drive shear head head style, 0.257 inches head height, grip diameter: between 0.435 inches and 0.4367 inches .
Manufacturer part number VCG0009L7-20 for national stock number 5306012910687.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-291-0687.
-
MPN or Model
VCG0009L7-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.658 inches and 0.708 inches -
Fastener Length
Between 1.918 inches and 1.948 inches -
Head Style
Spline drive shear head -
Head Height
0.257 inches -
Grip Diameter
Between 0.435 inches and 0.4367 inches -
Head Minor Diameter
Between 0.711 inches and 0.717 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
50.0 rockwell c and 56.0 rockwell c -
Minimum Yield Strength
216000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-406-3080 MPN 3M925C3-4AClose Tolerance Screw
- 5305-01-413-4581 MPN VCL0009-7-26Close Tolerance Screw
- 5306-00-107-9238 MPN GB511BY3HM3Shear Bolt
- 5306-00-205-3700 MPN BACB30NE6-18Close Tolerance Bolt
- 5306-01-027-5249 MPN ST3M571-4-18Close Tolerance Bolt
- 5306-01-042-2354 MPN VAL22034-5GS10Shear Bolt
- 5306-01-045-2435 MPN VAL23607-3-23Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-291-0687 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0009L7-20 | Valley-todeco, Inc. |
H411L7-20 | Huck International, Inc. |
120978L7-20 | Sps Technologies, Llc |
AIC596L7-20 | Sps Technologies, Llc |
PBF7521L7-20 | Sps Technologies, Llc |
120978L7-20 | Sps Technologies, Llc |
C7521L7-20 | Lockheed Martin Corporation |
H411L7-20 | Huck Intl Inc |
VS3133L7-20 | Arconic Global Fasteners & Rings, |
C7521L7-20 | Sps Technologies, Llc |
C7521L7-20 | Sps Technologies, Llc |
C7521L7-20 | Sps Technologies, Llc |
C7521L7-20 | Sps Technologies, Llc |
VCG009L7-20 | Valley-todeco, Inc. |
VS3133L7-20 | Alcoa Global Fasteners, Inc. |