NSN 5305-01-353-3627
High Torque Screw
Between 0.573 inches and 0.603 inches fastener length, fillister head style, between 0.265 inches and 0.270 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS1122V5 for national stock number 5305013533627.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-353-3627.
-
MPN or Model
NAS1122V5
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.573 inches and 0.603 inches -
Head Style
Fillister -
Head Diameter
Between 0.265 inches and 0.270 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1621 inches and 0.1627 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4967 assn standard single material response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1122 professional/industrial association standard
More from these suppliers
- 5305-00-007-0208 MPN NAS1100E00-5Machine Screw
- 5305-00-007-2952 MPN NAS1100C02-2Machine Screw
- 5305-00-058-5049 MPN MS24694S111Machine Screw
- 5305-00-121-8886 MPN MS27577-4-14Close Tolerance Screw
- 5305-00-151-0732 MPN MS35198-3Machine Screw
- 5305-00-205-3919 MPN NAS1218-3E6Machine Screw
- 5305-00-239-1691 MPN NAS1635-04LL4Socket Head Cap Screw
- 5305-00-241-1077 MPN NAS1635-02LL12Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-353-3627 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1122V5 | National Aerospace Standards |
Stock Check
- NE: 356
- NS: 11