NSN 5305-01-353-4115
High Torque Screw
Between 0.387 inches and 0.434 inches fastener length, flat countersunk head style, between 0.297 inches and 0.302 inches head diameter, thread diameter: 0.250 inches.
Manufacturer part number HT184-3-2 for national stock number 5305013534115.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-353-4115.
-
MPN or Model
HT184-3-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 0.387 inches and 0.434 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-454-1169 MPN NAS1134V6Close Tolerance Screw
- 5305-00-527-4423 MPN HT5M13Close Tolerance Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
- 5305-00-680-5412 MPN NAS1204-48Close Tolerance Screw
- 5305-00-932-3911 MPN HT6V16Machine Screw
- 5305-00-951-8187 MPN NAS1203-9DClose Tolerance Screw
- 5305-01-023-8193 MPN NAS1191-04T4BSocket Head Cap Screw
- 5305-01-080-0672 MPN NAS1189E06P10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-353-4115 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT184-3-2 | Hi-shear Corporation |
HT184-3-2 | Lisi Aerospace Canada Corp |