NSN 5305-01-356-2534
High Torque Screw
Between 0.890 inches and 0.920 inches fastener length, oval countersunk head style, between 0.469 inches and 0.474 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number LD111-0047-0507 for national stock number 5305013562534.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-356-2534.
-
MPN or Model
LD111-0047-0507
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.467 inches -
Fastener Length
Between 0.890 inches and 0.920 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.469 inches and 0.474 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq+35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-217-0689 MPN BACB30LU3-5XShoulder Screw
- 5305-01-435-3015 MPN BACB30LU5-15Close Tolerance Screw
- 5305-01-435-9035 MPN BACB30LU9-28Close Tolerance Screw
- 5305-01-541-5249 MPN 3M1169C4-12AFClose Tolerance Screw
- 5306-00-324-7713 MPN VAL23033-7-48Close Tolerance Bolt
- 5306-00-901-2066 MPN VFK100G-06060Shear Bolt
- 5306-01-044-2985 MPN VAL23607-4-32Shoulder Bolt
- 5306-01-054-3415 MPN VCG0009-7-14Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-356-2534 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0047-0507 | Boeing Company, The |
LD111-0047-0507 | Sps Technologies, Llc |
LD111-0047-0507 | Valley-todeco, Inc. |
LD111-0047-0507 | J.w. Manufacturing, Inc |
LD111-0047-0507 | Sps Technologies, Llc |
LD111-0047-0507 | Sps Technologies, Llc |
LD111-0047-0507 | Sonic Industries Inc. |
LD111-0047-0507 | Hi-shear Corporation |
LD111-0047-0507 | Sps Technologies, Llc |
LD111-0047-0507 | Lisi Aerospace Canada Corp |
LD111-0047-0507 | Arconic Global Fasteners & Rings, |
LD111-0047-0507 | Arconic Global Fasteners & Rings, |