NSN 5305-01-138-4707
High Torque Screw
Between 1.438 inches and 1.468 inches fastener length, flat countersunk head style, between 0.692 inches and 0.763 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number HT4025L6 for national stock number 5305011384707.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-138-4707.
-
MPN or Model
HT4025L6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.666 inches -
Fastener Length
Between 1.438 inches and 1.468 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.692 inches and 0.763 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
High-torque -
End Application
Aircraft hornet f/a-18 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-3081 MPN LS15265V3-34Close Tolerance Screw
- 5305-01-056-1510 MPN BACB30LU4-20Close Tolerance Screw
- 5305-01-613-2233 MPN PMT8704-12Close Tolerance Screw
- 5306-00-149-1835 MPN VEP220555-12-38Machine Bolt
- 5306-00-571-9558 MPN VAL23001-4D027Shear Bolt
- 5306-00-935-7528 MPN VFK100G-05028Shear Bolt
- 5306-01-006-9449 MPN J644P10DMachine Bolt
- 5306-01-024-2457 MPN 3M33-4H21Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-138-4707 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L6 | Sps Technologies, Llc |
HT4025L6-13 | Huck International, Inc. |
HT4025L6-13 | Hi-shear Corporation |
HT4025L6-13 | Sps Technologies, Llc |
HT4025L6-13 | Arconic Global Fasteners & Rings, |
HT4025L6-13 | Lisi Aerospace Canada Corp |
HT4025L6-13 | Sps Technologies, Llc |
ST3M454-6L13 | Valley-todeco, Inc. |
ST3M454-6L13 | Heartland Precision Fasteners, Inc. |
ST3M454-6L13 | Houston Precision Fasteners I, Lp |
HT4025L613 | Sps Technologies, Llc |
ST3M454-6L13 | Fastener Innovation Technology, Inc. |
HT4025L6-13 | Sps Technologies, Llc |
11905-6L13 | Reid Products Inc. |
ST3M454-6L13 | West Coast Aerospace Inc |
WC4025L-6-13 | West Coast Aerospace Inc |
ST3M454-6L13 | Sps Technologies Ltd Tj Brooks |
HT4025L6-13 | Huck Intl Inc |
HT4025L6-13 | Alcoa Global Fasteners, Inc. |