NSN 5305-01-359-0240
High Torque Screw
Torque-set recess per ms33781.
Manufacturer part number NAS1578V4T11 for national stock number 5305013590240.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-359-0240.
-
MPN or Model
NAS1578V4T11
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.076 inches and 1.106 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches fastener -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5940-01-439-4148 MPN NAS1063A6-510BJTerminal Board Marker Strip
- 1680-01-524-1349 MPN NAS520-12-9Aircr Air Duct Hose
- 5935-01-355-3702 MPN AS50151Electrical Plug Connector
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-007-6173 MPN NAS1100E00-6Machine Screw
- 5305-00-057-0498 MPN MS51958-2Machine Screw
- 5305-00-182-9363 MPN NAS1633-30Machine Screw
- 5305-00-297-8209 MPN MS35215-48Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-359-0240 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578V4T11 | National Aerospace Standards |