NSN 5305-01-362-7261
High Torque Screw
Between 4.102 inches and 4.132 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.241 inches and 0.244 inches .
Manufacturer part number HR239-4-62 for national stock number 5305013627261.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-362-7261.
-
MPN or Model
HR239-4-62
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 4.102 inches and 4.132 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.241 inches and 0.244 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 3.865 inches and 3.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response or ams5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-077-8633 MPN NAS1101-06-32Machine Screw
- 5305-01-182-7681 MPN BACB30LU4D10Close Tolerance Screw
- 5305-01-339-1417 MPN BACB30NT2K4Close Tolerance Screw
- 5305-01-381-1902 MPN 1701-3-12Close Tolerance Screw
- 5305-01-512-8347 MPN TX1026V3-27AClose Tolerance Screw
- 5305-01-512-8368 MPN TX1027D4-4AClose Tolerance Screw
- 5305-01-512-8375 MPN TX1026D4D16AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-362-7261 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR239-4-62 | Hi-shear Corporation |
HR239-4-62 | Lisi Aerospace Canada Corp |
E008-4-62 | Huck International, Inc. |
AIC1651-4-62 | Sps Technologies, Llc |
SC3103-4-62 | Arconic Global Fasteners & Rings, |
PBF1416-4-62 | Sps Technologies, Llc |
123742-4-62 | Sps Technologies, Llc |
E008-4-62 | Huck Intl Inc |