NSN 5305-01-364-3584
High Torque Screw
Between 1.576 inches and 1.606 inches fastener length, flat countersunk head style, between 0.464 inches and 0.5066 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1580A4R19D for national stock number 5305013643584.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-364-3584.
-
MPN or Model
NAS1580A4R19D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.576 inches and 1.606 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.5066 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.450 inches first hole and 1.500 inches first hole -
Material
Steel comp 4140 and steel comp e4340 and steel comp 8740 -
Material Specification
Mil-s-5626 military specification single material response and mil-s-5000 military specification single material response and mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5930-00-539-7169 MPN NAS543-2Toggle Switch
- 4820-01-662-8443 MPN 65C26814-2Valve Cover Plate
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-008-5846 MPN NAS1632E26Machine Screw
- 5305-00-008-9113 MPN NAS1190E02T4LSocket Head Cap Screw
- 5305-00-043-0544 MPN NAS623-6-4Machine Screw
- 5305-00-051-4484 MPN MS51973-9Setscrew
- 5305-00-057-0539 MPN MS51958-58Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-364-3584 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A4R19D | National Aerospace Standards |