NSN 5305-01-364-3586
High Torque Screw
Between 1.286 inches and 1.316 inches fastener length, flat countersunk head style, between 0.339 inches and 0.3813 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS1580V3T15D for national stock number 5305013643586.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-364-3586.
-
MPN or Model
NAS1580V3T15D
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.286 inches and 1.316 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.3813 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.160 inches first hole and 1.210 inches first hole -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 military specification single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-00-926-8120 MPN NAS191-16Terminal Board
- 5305-00-038-2437 MPN NAS514P832-9Machine Screw
- 5305-00-046-6987 MPN NAS1101E06-12BMachine Screw
- 5305-00-051-8496 MPN MS24625-19Tapping Screw
- 5305-00-058-9373 MPN MS51977-40Setscrew
- 5305-00-079-7976 MPN MS24694S194Machine Screw
- 5305-00-206-3708 MPN NASM7839Machine Screw
- 5305-00-308-9469 MPN NAS1351-4-16PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-364-3586 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V3T15D | National Aerospace Standards |