NSN 5305-01-365-0403
High Torque Screw
Between 0.543 inches and 0.573 inches fastener length, flat countersunk undercut head style, between 0.355 inches and 0.397 inches head diameter, head height: 0.063 inches .
Manufacturer part number NAS8704-3 for national stock number 5305013650403.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-365-0403.
-
MPN or Model
NAS8704-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.543 inches and 0.573 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.355 inches and 0.397 inches -
Head Height
0.063 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas8704 professional/industrial association standard
More from these suppliers
- 5305-00-007-2962 MPN NAS1743C3T14Socket Head Cap Screw
- 5305-00-079-2824 MPN NAS1101C4-10Machine Screw
- 5305-00-079-7961 MPN MS24694S209Machine Screw
- 5305-00-116-0028 MPN NAS603-27PMachine Screw
- 5305-00-132-1379 MPN MS24625-32Tapping Screw
- 5305-00-145-0705 MPN MS27039C1-05Machine Screw
- 5305-00-151-5682 MPN MS21262-97Socket Head Cap Screw
- 5305-00-170-2931 MPN NAS1352C8-10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-365-0403 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8704-3 | National Aerospace Standards |