NSN 5305-01-365-5794
High Torque Screw
1.1185 inches fastener length, truss head style, between 0.427 inches and 0.447 inches head diameter, head height: between 0.075 inches and 0.080 inches .
Manufacturer part number 3D0160-3-11 for national stock number 5305013655794.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-365-5794.
-
MPN or Model
3D0160-3-11
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.431 inches -
Fastener Length
1.1185 inches -
Head Style
Truss -
Head Diameter
Between 0.427 inches and 0.447 inches -
Head Height
Between 0.075 inches and 0.080 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Point Style
Flat -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C-17a -
Thread Diameter
0.1900 inches -
Grip Length
0.6875 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Bolt, truss head, ms33781 recess, 6ai-4v titanium alloy -
Material
Titanium alloy uns r56400 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-969-4752 MPN AIC1351-008Socket Head Cap Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-025-6412 MPN AIC812-08-4Machine Screw
- 5305-01-116-3085 MPN NAS1101-06H3Machine Screw
- 5305-01-329-9741 MPN AIC1700-4-7AClose Tolerance Screw
- 5305-01-417-2492 MPN TX1026V3-6AClose Tolerance Screw
- 5305-01-417-2496 MPN TX1027D3-20AClose Tolerance Screw
- 5305-01-462-2828 MPN TX1026V3-7AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-365-5794 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3D0160-3-11 | Boeing Company, The |
AIC1515-3-11 | Sps Technologies, Llc |
SC5063-3-11 | Arconic Global Fasteners & Rings, |