NSN 5305-01-367-9274
High Torque Screw
Between 0.620 inches and 0.650 inches fastener length, flat countersunk head style, 0.266 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS8703A5 for national stock number 5305013679274.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-367-9274.
-
MPN or Model
NAS8703A5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.620 inches and 0.650 inches -
Head Style
Flat countersunk -
Head Diameter
0.266 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
End Application
Hh-60 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas 4006 assn standard single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5935-00-517-7721 MPN NAS1641R16T24S6Electrical Receptacle Connector
- 5940-01-380-6763 MPN NAS1063B81-100Terminal Board Marker Strip
- 5930-01-622-7018 MPN MS24655-135Toggle Switch
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-001-4713 MPN NAS1102C04-18Machine Screw
- 5305-00-035-5383 MPN NAS1581A3H13TClose Tolerance Screw
- 5305-00-164-8319 MPN NAS663V2HTClose Tolerance Screw
- 5305-00-170-2743 MPN NAS1352C04-31Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-367-9274 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8703A5 | National Aerospace Standards |