NSN 5305-01-367-9829
High Torque Screw
Between 0.854 inches and 0.884 inches fastener length, flat countersunk head style, between 0.265 inches and 0.303 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number SC5046U3-7 for national stock number 5305013679829.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-367-9829.
-
MPN or Model
SC5046U3-7
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.431 inches -
Fastener Length
Between 0.854 inches and 0.884 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.265 inches and 0.303 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-650-9941 MPN HLT265TB-8-15-39Rivet Pin
- 5305-00-905-5568 MPN 3006T69P01Socket Head Cap Screw
- 5305-01-047-1071 MPN HT4011-5-8Shoulder Screw
- 5305-01-135-6493 MPN HT4054-3-3AClose Tolerance Screw
- 5305-01-136-6121 MPN HT4053-4-2AClose Tolerance Screw
- 5305-01-206-3444 MPN SC2176T-04-05Machine Screw
- 5305-01-246-3871 MPN SC1779-4-12Close Tolerance Screw
- 5305-01-296-7786 MPN VT1730-4-89Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-367-9829 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC5046U3-7 | Arconic Global Fasteners & Rings, |
3D0179-3-7 | Boeing Company, The |