NSN 5305-01-371-2854
High Torque Screw
Between 1.829 inches and 1.875 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3731 inches and 0.3742 inches .
Manufacturer part number NAS336CP11-5 for national stock number 5305013712854.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-371-2854.
-
MPN or Model
NAS336CP11-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.629 inches and 0.675 inches -
Fastener Length
Between 1.829 inches and 1.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3731 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.3750 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.928 inches first hole and 0.948 inches first hole -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5625 military specification 1st material response or mil-s-8844 military specification 2nd material response or ams6414 assn standard 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-414, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 5940-01-425-7389 MPN NAS1063C8-321Terminal Board Marker Strip
- 5940-01-449-7678 MPN NAS1063A12-N1001Terminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5940-01-437-8563 MPN NAS1063A2-107CXTerminal Board Marker Strip
- 5305-00-007-6207 MPN NAS1393C00-3Machine Screw
- 5305-00-079-7986 MPN MS24694S204Machine Screw
- 5305-00-081-5683 MPN MS24667-14Socket Head Cap Screw
- 5305-00-088-1053 MPN MS16988 MOD 5/16D X 2.75 LGSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-371-2854 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |
NAS336CP11-5 | National Aerospace Standards |