NSN 5305-01-373-3844
High Torque Screw
Between 0.676 inches and 0.706 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number NAS1134-6 for national stock number 5305013733844.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-373-3844.
-
MPN or Model
NAS1134-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.676 inches and 0.706 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.375 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches grip32.0 microinches threads -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-143-0687 MPN NAS1389-10Conductor Splice
- 1560-01-424-2476 MPN NAS6704D27Aircraft Structural Component Support
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-008-5882 MPN NAS1101E04-4PMachine Screw
- 5305-00-016-8173 MPN MS27039-5-25Machine Screw
- 5305-00-052-7484 MPN MS35198-86Machine Screw
- 5305-00-055-2568 MPN NAS1218-3-2Machine Screw
- 5305-00-067-3863 MPN NAS1189-3P7LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-373-3844 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1134-6 | National Aerospace Standards |
Stock Check
- NS: 156
- NE: 2833