NSN 5305-01-376-5288
High Torque Screw
0.778 inches fastener length, flat countersunk head style, between 0.4640 inches and 0.5066 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number AIC3339C4-6 for national stock number 5305013765288.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-376-5288.
-
MPN or Model
AIC3339C4-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
0.778 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.4640 inches and 0.5066 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
End Application
Agm129a -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Width Across Flats
Between 0.1562 inches and 0.1587 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2586 MPN HST12AP5-5Materi Aircraft Pin
- 5305-00-761-3556 MPN NAS1101-3-9Machine Screw
- 5305-00-935-7513 MPN NAS110-00-3Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-096-1242 MPN AIC811-3-31Socket Head Cap Screw
- 5305-01-327-9688 MPN AIC1652-4-10AClose Tolerance Screw
- 5305-01-418-9140 MPN TX1026V3-24Close Tolerance Screw
- 5305-01-418-9853 MPN TX1027D3-4AFClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-376-5288 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC3339C4-6 | Sps Technologies, Llc |
123545C4-6 | Sps Technologies, Llc |
4080-70016C4-6 | Raytheon Company |
M963C4-6 | Huck International, Inc. |
SC1797C4-6 | Arconic Global Fasteners & Rings, |
SC1797C4-6 | Alcoa Global Fasteners, Inc. |
4080-70016C4-6 | Hughes Missile Systems Co |
M963C4-6 | Huck Intl Inc |