NSN 5305-01-377-0984
High Torque Screw
Between 0.892 inches and 0.922 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number T009-3-9 for national stock number 5305013770984.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-377-0984.
-
MPN or Model
T009-3-9
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.892 inches and 0.922 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-080-0207 MPN 3MA336CFA15Machine Screw
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-840-1203 MPN 51B222-28HMachine Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-107-3523 MPN NAS1101-06-59Machine Screw
- 5305-01-158-6762 MPN AIC940-3-8Machine Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-284-7160 MPN AIC985-5-29Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-377-0984 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
T009-3-9 | Huck International, Inc. |
HR240-3-9 | Hi-shear Corporation |
HR240-3-9 | Lisi Aerospace Canada Corp |
03A174-3-9 | Northrop Grumman Technical Services, |
AIC1652-3-9 | Sps Technologies, Llc |
SC3102-3-9 | Arconic Global Fasteners & Rings, |
PBF1417-3-9 | Sps Technologies, Llc |
123743-3-9 | Sps Technologies, Llc |
T009-3-9 | Huck Intl Inc |
03A174-3-9 | Northrop Grumman Systems Corporation |
03A174-3-9 | Northrop Grumman Systems Corporation |