NSN 5305-01-382-0693
High Torque Screw
0.613 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC985-3D-4H for national stock number 5305013820693.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-382-0693.
-
MPN or Model
AIC985-3D-4H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
0.613 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Hexagon -
End Application
Pacer dawn -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Width Across Flats
0.128 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Anee and aaur -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.473 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 national specification 1st treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-268-2047 MPN 12S128-7Aircraft Structural Component Support
- 5305-00-080-0148 MPN 3MA334CFA12Machine Screw
- 5305-00-080-9291 MPN 3MA333CFA7Machine Screw
- 5305-01-055-3807 MPN BACB30LU6-8Close Tolerance Screw
- 5305-01-158-5373 MPN AIC940-5-6Machine Screw
- 5305-01-196-5089 MPN AIC9535-7-38Close Tolerance Screw
- 5305-01-203-1664 MPN BACB30LU4-18Close Tolerance Screw
- 5305-01-284-7157 MPN C7985-5-23Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-382-0693 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985-3D-4H | Sps Technologies, Llc |
VT1694F3H4D | Arconic Global Fasteners & Rings, |
VT1694F3H4D | Alcoa Global Fasteners, Inc. |
121558H3-4P | Sps Technologies, Llc |
5306-005-3D4H | Aidc/aerospace Industrialdevelopment |